The 7kW–240kW DC charger range is designed to support different EV charging environments, from compact parking installations to higher-power commercial charging stations. The 7kW–40kW models are available in wall-mounted or column-mounted configurations, while the 60kW–240kW models use a larger integrated cabinet design for rapid charging applications.

With multiple power levels and support for several international charging standards, the range can be configured according to the available electrical supply, vehicle compatibility, and expected charging demand.

Compact 7kW–40kW DC Chargers

The lower-power models provide a space-efficient option for locations where installation flexibility is important. They support GBT, CCS1, CCS2, and CHAdeMO charging standards and can be mounted directly on a wall or installed on a column.

Connectivity options include OCPP, 4G, Ethernet, Wi-Fi, and RFID. A 4.3-inch color touch screen provides the main user interface, while multiple electrical protection functions help maintain safe operation.

Key specifications include:

• Power options: 7kW, 15kW, 20kW, 30kW, 40kW
• Charging standards: GBT, CCS1, CCS2, CHAdeMO
• Output current: 0–300A
• Input voltage: AC 380V ±15%
• Output voltage: 200–750V DC or 200–1000V DC
• Operating temperature: -25°C to +50°C, with derating above 50°C
• Input frequency: 50Hz / 60Hz
• Networking protocol: OCPP 1.6J
• Protection rating: IP54
• Work efficiency: ≥0.99
• Power factor: ≤5%
• Display: 4.3-inch high-brightness color touch screen
• Functions: Current switching, appointment timing, and multiple protection
• Connectivity: OCPP, 4G, Ethernet, Wi-Fi, RFID
• Safety protection: Charging-gun temperature detection, overvoltage, undervoltage, overload, short circuit, grounding, overtemperature, low temperature, insulation monitoring, polarity reversal, lightning, emergency stop, and leakage-current protection

60kW–240kW Integrated DC Charger

For locations that require faster charging and greater capacity, the integrated DC charger is available in 60kW, 120kW, 180kW, and 240kW versions. It provides stable DC output and is designed to work with the battery management system of different electric vehicles.

The charger also supports intelligent power distribution, automatically adjusting available output according to the charging requirements of connected vehicles. 4G or Ethernet connectivity allows the unit to connect with an operation management platform.

Specifications include:

• Models: DPEV-60K, DPEV-120K, DPEV-180K, DPEV-240K
• Dimensions: 1756 × 1060 × 570mm
• Charging standards: GBT, CCS1, CCS2, NACS
• Cable length: 5m
• Input voltage: 380Vac ±15% (A, B, C, N, PE)
• Input current: <120A, <240A, <360A, <480A
• Input frequency: 45–55Hz
• Output voltage: 50–1000V
• Maximum output current: 200A; single gun 250A
• Rated power: 60kW, 120kW, 180kW, 240kW
• Display: 7-inch touch screen
• Charging methods: RFID card, password, mobile QR code, VIN recognition
• Installation: Integrated type
• Networking: 4G / Ethernet
• Maximum efficiency: ≥96.5%
• Power factor: ≥99%
• Operating temperature: -25°C to +50°C
• Storage temperature: -40°C to +70°C
• Relative humidity: ≤95%
• Atmospheric pressure: 70–106kPa
• Altitude: ≤2000m
• Cooling: Forced-air cooling with dust-proof design
• Protection rating: IP55
• Acoustic noise: ≤65dB
• Protection functions: Overvoltage, undervoltage, overcurrent, short circuit, leakage, and emergency stop protection

Suitable for a Range of EV Charging Sites

With compact lower-power models and high-capacity integrated chargers, this DC charging range can serve private, commercial, and public charging locations. The combination of multiple power levels, connector standards, networking options, and built-in protection makes it easier to select a configuration that fits the specific requirements of each site.