The constraint is rarely the charger — it is the grid connection behind it. Storage and solar fix that on one controller.
Canopy or rooftop
Cabinet or container
Existing connection
Schedules charge and discharge · peak shaving · cell-level monitoring
Draws from all three sources at once
Storage buffers each session while the grid refills it slowly, so the connection stays modest.
Canopy or rooftop solar supplies daytime load directly and cuts purchased kWh.
Containerised or mobile storage lets a site open before a full upgrade is approved.
The same manufacturing partner builds the storage that sits behind the charger — one supplier for the whole site.
usable capacity
| PCS | 100 kW |
|---|---|
| Format | Cabinet |
| Dimensions | 1,600 × 1,330 × 2,250 mm |
usable capacity
| PCS | 300 kW |
|---|---|
| Format | 10 ft container |
| Dimensions | 3,000 × 2,438 × 2,591 mm |
usable capacity
| PCS | 500 kW |
|---|---|
| Format | 20 ft container |
| Dimensions | 6,058 × 2,438 × 2,591 mm |
usable capacity
| PCS | 1,000 kW |
|---|---|
| Format | 40 ft container |
| Dimensions | 12,196 × 2,438 × 2,591 mm |
LFP cells · ≥ 6,000 cycles · IP54 enclosure · forced-air cooling · aerosol fire suppression · BMS and EMS included
Already in the field: 800+ PV-storage sets in Vietnam · 60+ sets on a Kunming solar-storage project · 50+ mobile storage units in Shanghai · 20+ sets in Tianjin.
An AI optimisation layer for chillers and compressed air, offered alongside EZEV projects through our partner DeepCtrls.
Optimisation control for HVAC and compressed-air systems — the product that produces the saving.
Intelligent operation and maintenance platform, with real-time verification of the saving.
Simulation platform used at design stage to size a high-efficiency cooling plant before it is built.
DeepCtrls technology is supplied by a partner, not by EZEV.
Tell us about the site and connection — we will size solar, storage and charging together.
Talk to our team →Pick a channel for fast support
